Shop

Cookie Composites low profile Liquid Lens is the perfect choice for all your filming requirements. These quality Japanese manufactered lenses have minimal barrel distortion and are vignette free. The question is Liquid 3 or Liquid 5?? and do I need a filter kit???
As a camera flyer you need to identify what disciplines you wish to film, your experience level and the distance away from your subject when filming. Most experience camera flyers generally have more than one lens in there arsenal so they can adapt there equipment to suit the conditions.

Images taken using Sony PC1000

The Liquid 2 x 0.25 lens has the widest field of view os all our lenses.This lens is suitable for flying handycam, belly/foot mounted applications and when filming at a distance of <1m or 3 feet.

The Liquid 3 x 0.29 lens. This lens is suitable for flying inside camera on linked exits, inside formation flying when videoing your friends, handycam and belly mounted applications and when filming at a distance of <2m or 6 feet. When filming larger subjects you will be able to get noticably closure with out cropping.

The Liquid 5 x0.45 lens has a field of view slightly less than the Liquid 3. This lens is best suited for filming outside camera where your subject is at distances of >2m or 6 feet. This lens is especially good for a beginner camera flyer as you donot have to get as close to your subject. It is also suitable for Tandem videographers and RW team camera flyers.

The Filter Kit option available with the Liquid lens range provids a sacrificial glass element that is inexpensive to replace if damaged through scratching. The kit also allows special effect filters to be adapted to the lens.

The Digital Plug switch is compatible with the Canon: D30, D60, 10D, 20D, 30D, 5D, D1, D1 Mark II, Ds1, and Ds1 Mark II as well as other Canon cameras using this type of digital plug.

The Standard (2.5mm Switch) switch is compatible with the Canon Digital Rebel 300D, Canon Digital Rebel XT 350D, 400D, 450D, Canon Rebel film cameras, and any other cameras using a 2.5mm plug.

If you are planning to add a still camera to your helmet a remote shutter release will give you hands free operation of your camera.
Conceptus switches are the orignal manufactures of skydiving specific shutter releases and two options are available.

Bite Switch
The Bite Switch is Conceptus' original mouth-operated shutter release. It is the favorite of freeflyers and photographers of other skydiving disciplines who need a simple, intuitive, hands-free camera shutter release switch. It utilizes a very gentle bite to operate the camera and is extremely easy to use. It can be used with any camera equipped with a remote shutter release jack. The supplied plug fits most Canon film cameras – others cameras usually require custom connection, which you can find detailed instructions for on the Connection page.

The Bite Switch is comprised of a durable, sealed tubular switch assembly measuring 1.5 inches long by 1/4 inch diameter, a 36 inch coaxial wire, and a 2.5mm plug with a 90 degree elbow bend. During use, the switch is placed in the mouth with the wire pointing either to the right or left.

Biting anywhere on the red section ("bite zone") actuates the switch and triggers the camera. There are two tactile ribs so the user can instantly feel the bite zone with their teeth and lips. The required bite force is about what it would take to bite through a small carrot, or about how hard the average person can comfortably bite on their own finger without pain.

The actual depression of the switch mechanism is only about 1/8", so very little jaw movement is needed. As a result, helmet motion is extremely small. Be aware the Bite Switch works best when used with open-faced helmets or helmets with chin cups allowing the user to open and close the mouth at least to a small degree.

It should always be bitten only with the front teeth, not with the sharp canine teeth, and only hard enough to slightly flatten the tubular portion. Usage otherwise may deform the internal components or puncture the flexible casing and cause a malfunction.

The Pro Mouth Switch

is the newest still camera switch. This switch, manufactured by Sonic of the Ranch PRO Shop in New York, features a unique mouth-operated switch. It is operated by placing the PRO Mouth Switch between your tongue and the roof of your mouth. You then press it with your tongue.

This switch is compatible with the Canon Digital Rebel 300D, Canon Digital Rebel XT 350D, Canon Rebel film cameras, and any other cameras using a 2.5mm plug. This switch is also compatible with the HypEye D Pro Expansion Kit. Length of the switch wire is 32".

Our Helmets are manufactured using the highest quality Carbon Fibre products.

You now have the option of customizing the colors of your complete helmet system. All painted finishes are created using quality 2 part epoxy finishes guaranteeing superb shine and durability.

Please anticipate a 3 week lead time on all painted options

Cookie Cube

The Cookie Cube is a sturdy camera bag designed to carry all your camera gear. Features

• Room for you camera helmet
• Room for your Still camera
• Adjustable compartments
• Pockets for camera cables and chargers
• Hard base and side with molded handle
• Perfect as aircraft hand luggage Size 40cm x 25cm x 24cm